Neon Strip is a versatile EL lamp, a perfect alternative to led, neon or other strip-lighting solutions. It comes in standard lengths of 25m or 50m which can easily be joined together to create any desired length, or it can simply be cut to a shorter length. There are also four width sizes available, with lit-area widths of 10, 15, 20 and 30mm. Neon Strip is available in two different systems – bus-bar and split system which are explained in more detail under Products


Colours and Effects

Neon Strip comes in six colours and a virtually limitless range of colours is available with the addition of a colour filter. Sections of Neon Strip, even of various colours, can be joined together and lit as a single strip or each section can be driven independently, permitting different lighting and sequencing effects.


How to join sections of Neon Strip

Peel the backing off the two strips to be joined and connect the electrodes

Driving Neon Strip

Neon Strip is driven by a AC power supply from a low voltage DC power source by means of an inverter. The inverter required to drive Neon Strip depends on the length of the strip that needs to be lit. Very long lengths of Neon Strip can be lit but the length that can be driven is limited by the size of the power supply available to drive it.
Visual can provide the electronics and advice to drive Neon Strip, especially in relation to correctly matching Neon Strip with the right inverter so as to provide maximum performance and product lifetime.